EN 1.0565 steel is a carbon (unalloyed) steel formulated for primary forming in forged products. The specified properties are suitable for the normalized case. 1.0565 is the EN numerical definition for this material. P355NH is the EN chemical designation.
It has a very high embodied energy among processed carbon or unalloyed steels. In addition, it has a fairly high basic cost and moderately high electrical conductivity.
The graphic bars on the following material properties cards compare EN 1.0565 steel with: machined carbon or non-alloy steels (top), all ferrous alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the respective set. A half full bar means it's 50% of the highest value.
EN 1.0566 steel is a carbon (unalloyed) steel formulated for primary forming in forged products. The specified properties are suitable for the normalized case. 1.0566 is the EN numerical definition for this material. P355NL1 is the EN chemical designation.
It has a very high embodied energy among processed carbon or unalloyed steels. In addition, it has a fairly high basic cost and moderately high electrical conductivity.
The graphic bars on the following material properties cards compare EN 1.0566 steel with: machined carbon or non-alloy steels (top), all ferrous alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the respective set. A half-filled bar means 50% of the highest value, and so on.
Electrical Properties
|
Electrical Resistance
|
10-8ohm.m
|
|
Magnetic permeability
|
1.00005
|
|
Magnetic susceptibility
|
4.0e-8
|
Process Properties
|
Machinability
|
low
|
|
Hot Forming
|
good
|
|
Cold Forming
|
good
|
Thermal Recovery
|
Softening Annealing
|
732 ℃
240 min
|
|
Stress Relieving Annealing
|
566 ℃
30 min
|
Descriptive Features
|
Alpha Phase Crystal Structure
|
Below cph, 815 ° C
|
|
Beta Phase Crystal Structure
|
Above bcc, 999 ° C
|
Optical Properties
|
Emissivity(0-1)
|
0.30
|
|
Reflection Coefficient, Visibility(0-1)
|
0.56
|
| Dicke in mm |
Formate in mm |
|
| P 355 NH / 1.0565 + P 355 NL2 / 1.0566 |
3 |
bis |
5 |
1.500 |
x |
3.000 |
| 3 |
bis |
5 |
1.500 |
x |
6.000 |
| 5 |
bis |
200 |
1.000 |
x |
2.000 |
| 5 |
bis |
120 |
1.250 |
x |
2.500 |
| 5 |
bis |
200 |
2.000 |
x |
6.000 |
| 5 |
bis |
80 |
2.000 |
x |
12.000 |
| 5 |
bis |
100 |
2.500 |
x |
6.000 |
| 5 |
bis |
80 |
2.500 |
x |
12.000 |
| 8 |
bis |
120 |
1.500 |
x |
3.000 |
| 8 |
bis |
120 |
3.000 |
x |
6.000 |
| 8 |
bis |
80 |
3000 |
x |
12.000 |